42Gears SureMDM Classification Details
This article summarizes which device attributes can be enriched from our connector with 42Gears SureMDM, and the benefits of using that enriched data in policy.
The 42Gears SureMDM connector gives Elisity detailed device data for policy decisions across managed OT endpoints. SureMDM's agent-based platform collects hardware details, software posture, compliance state, and group assignments from each managed device. Elisity combines its own network-based discovery with this management data to apply policy to devices such as HMIs, engineering workstations, operator workstations, and virtualized PLCs.
Query Match Order
When a new device is discovered by any of Elisity's methods, Cloud Control Center queries 42Gears SureMDM using the following parameters until a match is found:
- MAC Address and IP Address
- MAC Address (primary)
- IP Address (fallback if MAC is not known)
Engage Elisity support to modify the behavior of the above query order.
Refresh Cycle
By default, Cloud Control Center syncs 42Gears SureMDM data every few minutes, so a change in 42Gears SureMDM appears in Cloud Control Center shortly after.
Device attributes can also be refreshed on demand: select Refresh Attributes from the ... menu on the 42Gears SureMDM tile in the Trust Attributes section of the device's IdentityGraph view.
Devices that were learned before the connector was configured are automatically scheduled for enrichment.
Core Effective Attributes
42Gears SureMDM maps the following attributes to Elisity Core Effective Attributes. When 42Gears SureMDM is the highest-priority connector, these values populate the device's core identity in IdentityGraph:
| SureMDM Attribute | Elisity Core Effective Attribute | Example Value |
|---|---|---|
| Hostname | Hostname | file-server |
| Device Model Name | Model | VMware7,1 |
| Device Manufacture | Vendor | VMware, Inc. |
| Platform Type | Operating System | Windows |
Enrichment Attributes
The following table describes the attributes that 42Gears SureMDM provides to IdentityGraph for each discovered device:
| 42Gears SureMDM API Attribute | Elisity Attribute | Core Effective Attribute | Policy Group Match Criteria |
|---|---|---|---|
| Hostname | Hostname | Yes | Yes |
| DeviceModelName | Model | Yes | Yes |
| DeviceManufacture | Vendor | Yes | Yes |
| PlatformType | Operating System | Yes | Yes |
| DeviceName | Id | No | Yes |
| DeviceID | Device Id | No | Yes |
| ConnectionStatus | Connection Status | No | Yes |
| AgentVersion | Agent Version | No | Yes |
| WifiSSID | Wifi SSID | No | Yes |
| Isenrolled | Is Enrolled | No | Yes |
| IsLostModeEnabled | Is Lost Mode Enabled | No | Yes |
| AntivirusStatus | Antivirus Status | No | Yes |
| DeviceApprovedStatus | Device Approved Status | No | Yes |
| DeviceGroupPath | Device Group Path | No | Yes |
| DeviceBrand | Device Brand | No | Yes |
| OSVersion | OS Version | No | Yes |
| ReleaseVersion | Release Version | No | Yes |
| SerialNumber | Serial Number | No | Yes |
| CurrentFirmwareVersion | Firmware Version | No | Yes |
| Tags[].TagName | Tags | No | Yes |
The specific attributes available depend on the data 42Gears SureMDM collects for each device. Not all attributes are populated for every device. Boolean attributes are displayed as true or false. A value of -1 indicates the attribute is not available or not applicable for the device.
Next Steps
- Configure Dynamic Policy Groups using 42Gears SureMDM attributes as match criteria.
- Adjust the enrichment priority order for connectors in IdentityGraph.
- Set up the connector by following Connect 42Gears SureMDM.